Lyon County · Nevada
Epoxy & resin supply
for Fernley, NV
East of Reno along Interstate 80, Fernley has grown from a small farm town into a place with big new distribution buildings and fresh subdivisions.
Floors in Fernley
Fresh slabs in a dusty valley
Coating work includes warehouse floors, new-home garages, farm shops, and light industrial tenants moving into recently built space.
A lot of the concrete here is new, which means curing compounds, laitance and moisture still in the slab, and desert wind adds fine dust. Grind off compounds, test moisture, and vacuum thoroughly before priming.
When to install: Summers are hot and dry, so start early and keep resin out of direct sun. Winters bring cold nights, so heat the building and slab before coating.
Getting supplies: Fernley orders ship from U.S. Resin Supply nationwide, with shipping added to the order. The closest of our 10 stores is U.S. Resin Supply – Sacramento in Rancho Cordova, CA, about 165 driving miles away.
Recommended for Fernley
Systems to start with
Solid color floor
Try it for distribution warehouses in Fernley. Uniform pigmented EpoxyStarz with a specified protective finish.
View system →
Surface prep & repair
Start here for new-home garages in Fernley. Assessment, grinding and CrackStarz PolyFast repairs before coating.
View system →
Decorative flake
Try it for farm and equipment shops in Fernley. Vinyl flake broadcast over an EpoxyStarz base with a PolyStar PRO ST clear coat.
View system →A starting point, not a specification. Confirm the full build and each product’s data sheet with our team before ordering.
Fernley FAQ
Questions from Fernley
Do you ship epoxy and coating supplies to Fernley, NV?
Yes. U.S. Resin Supply ships nationwide, including to Fernley. Order online and shipping is added to your order. For product questions, call U.S. Resin Supply – Sacramento at (916) 200-7736.
Do new warehouse slabs need a moisture test before coating?
Yes. New concrete releases moisture as it cures, and a coating applied too early can blister or lose bond. Test with a humidity meter and follow the coating data sheet limits rather than counting days.
Where is the closest U.S. Resin Supply store to Fernley?
U.S. Resin Supply – Sacramento in Rancho Cordova, CA is the closest of our 10 stores, about 165 driving miles away. Most Fernley customers order online and have materials shipped.
Is there hands-on epoxy training for Fernley contractors?
Yes. Classes run at our stores in California, Nevada, Illinois and Florida, and contractors travel in for them. See the class list on this page or the training page for dates and seats.
Hands-on training
Learn it hands-on
Fernley contractors travel in for these hands-on classes at our stores:
Ordering from Fernley
1 · Order onlinePick your system and products from the catalog. Shipping to Fernley is added to your order.
2 · Ask before you buyNot sure what you need? Call U.S. Resin Supply – Sacramento at (916) 200-7736 (8:00 AM–4:30 PM) or email Rod@usresinsupply.com.
3 · Read the data sheetsCheck each product’s technical data sheet for mixing, cure and recoat times before the job.
Closest store
U.S. Resin Supply – Sacramento
11347 Folsom Blvd A, Rancho Cordova, CA 95742
(916) 200-7736 · Rod@usresinsupply.com · 8:00 AM–4:30 PM
Drive distances and times are estimates from OpenStreetMap routing without traffic. Shipping is available nationwide.